Vauxhall Corsa E Forum banner
1 - 20 of 24 Posts

·
Registered
Joined
·
961 Posts
That looks like a Seat Leon mk1 Cupra R splitter to me, available from your local Seat dealers parts dept. Part number 1ml805903 its about £45.
 

·
Registered
Joined
·
1,357 Posts
Jarviser said:
what's a splitter?
An aerodynamic fitting. (the grey/black thing under the bonnet). Completely pointless on a slow Corsa, only make a difference for Drag Racers/F1 Cars, Nascar etc.
 

·
Registered
Joined
·
1,665 Posts
LimeyUK said:
Jarviser said:
what's a splitter?
An aerodynamic fitting. (the grey/black thing under the bonnet). Completely pointless on a slow Corsa, only make a difference for Drag Racers/F1 Cars, Nascar etc.
Ah right looks nice, but if you have to do that with the reg plate it kinda spoils the effect and looks ridiculous.
 

·
Registered
Joined
·
2,902 Posts
Splitter and vents look great on that car, really suit the colour scheme too.

However the reg plate looks naff as well as being totally illegal anyway as far as I can see. (EU mandatory markings such as issuing dealer etc?)
 

·
Registered
Joined
·
1,357 Posts
Jarviser said:
LimeyUK said:
Jarviser said:
what's a splitter?
An aerodynamic fitting. (the grey/black thing under the bonnet). Completely pointless on a slow Corsa, only make a difference for Drag Racers/F1 Cars, Nascar etc.
Ah right looks nice, but if you have to do that with the reg plate it kinda spoils the effect and looks ridiculous.
The plate doesn't have to be like it is, it's just garryboys think it looks good :lol: :lol: :lol: :lol:
 

·
Registered
Joined
·
961 Posts
LimeyUK said:
The plate doesn't have to be like it is, it's just garryboys think it looks good :lol: :lol: :lol: :lol:
It might actually look OK if the surround/part where the number plate is supposed to go and the screw hole locators for the original plate werent visible or smoothed off because it stands out a mile and looks like a brand new car in a dealers that hasn't been plated yet.

The Leon Cupra R splitter looks OK on its own but it doesn't work on that car because its already got the factory VXR Pack/LE front splitter on it, it looks too much having another splitter added to the bottom of it
 

·
Registered
Joined
·
1,357 Posts
hendry said:
LimeyUK said:
The plate doesn't have to be like it is, it's just garryboys think it looks good :lol: :lol: :lol: :lol:
It might actually look OK if the surround/part where the number plate is supposed to go and the screw hole locators for the original plate werent visible or smoothed off because it stands out a mile and looks like a brand new car in a dealers that hasn't been plated yet.

The Leon Cupra R splitter looks OK on its own but it doesn't work on that car because its already got the factory VXR Pack/LE front splitter on it, it looks too much having another splitter added to the bottom of it
Nah, a plate on the side like that looks rubbish on the best of cars. Would be better without one if it were legal.
 

·
Registered
Joined
·
2,902 Posts
Yeah, the plate would look better on the front edge of the bonnet/nose if the bumper was modified to lose the plate mounting. A nice grill opening with an oil cooler or something would look better?
 

·
Registered
Joined
·
1,287 Posts
the plate looks great on an Evo or scooby as they have a massive intercooler and as pointed out no visible fixing position, on that car it looks stupid
 

·
Registered
Joined
·
32 Posts
Discussion Starter · #19 ·
It's a Seat Leon mk1 Cupra R splitter,, available from your local Seat dealers parts dept. Part number 1ml805903 it's £45. :D :D
 

·
Registered
Joined
·
32 Posts
Discussion Starter · #20 ·
And just so your all aware, it does fit but there was abit of excess left on each side of the bumper, near the wall of the tyre so I just cut that off :)
 
1 - 20 of 24 Posts
Top